Inovance MD500-PLUS Series - Page 101

Parameter Groups
‑100‑
F0-09
Running direction
Address:
0xF009
Min.:
0
Unit:
‑
Max.: 1 Data type: UInt16
Default:
0
Change: In real time
Value Range:
0: Same as the default direction
1: Reverse to the default direction
Description
You can change the rotation direction of the motor by modifying this parameter
without changing the motor wiring. Modifying this parameter is equivalent to
exchanging any two of the motor's U, V, W wires.
F0-10
Maximum frequency
Address:
0xF00A
Min.:
5
Unit:
Hz
Max.: 599 Data type: UInt16
Default:
50
Change:
At stop
Value Range:
5.00 Hz to 599.00 Hz
Description
This parameter defines the maximum output frequency of the AC drive.
F0-11
Source of the frequency upper limit
Address:
0xF00B
Min.:
0
Unit:
‑
Max.: 6 Data type: UInt16
Default:
0
Change:
At stop
Value Range:
0: F0‑12 (Frequency upper limit)
1: AI1
2: AI2
3: AI3
4: Pulse reference (DI5)
5: Communication
6: Multi‑speed reference
Description
0: F0‑12 (Frequency upper limit)
The frequency upper limit is set by F0‑12.
1: AI1
The frequency upper limit is input by current or voltage signal through the AI1.
The frequency is calculated according to the preset AI curve.