Parameter Groups
‑219‑
Bit00: Running frequency (Hz)
Bit01: Frequency reference (Hz)
Bit02: Bus voltage (V)
Bit03: Output voltage (V)
Bit04: Output current (A)
Bit05: Output power (kW)
Bit06: Output torque (%)
Bit07: DI status
Bit08: DO status
Bit09: AI1 voltage (V)
Bit10: AI2 voltage (V)
Bit11: AI3 voltage (V)
Bit12: Count value
Bit13: Length value
Bit14: Load speed display
Bit15: PID reference
Description
If a parameter needs to be displayed during running, set its corresponding bit to
1. After converting this binary number to a hexadecimal number, set it in F7‑03.
F7-04
LED running display parameter 2
Address:
0xF704
Min.:
0
Unit:
‑
Max.: 0xFFFF Data type: UInt16
Default:
0
Change: In real time
Value Range:
Bit00: PID feedback
Bit01: PLC stage
Bit02: Pulse input reference (kHz)
Bit03: Running frequency 2 (Hz)
Bit04: Remaining running time
Bit05: AI1 voltage before correction (V)
Bit06: AI2 voltage before correction (V)
Bit07: AI3 voltage before correction (V)
Bit08: Linear speed
Bit09: Current power‑on time (h)
Bit10: Current running time (min.)
Bit11: Pulse input reference (Hz)
Bit12: Communication setting
Bit13: Encoder feedback speed (Hz)
Bit14: Roll diameter (mm)
Bit15: Tension after taper (N)
To Next Page
Loading...
