Inovance MD500-PLUS Series - Page 255

Parameter Groups
‑254‑
Ones (position): Value of E02, E03, and E04
0: Coast to stop
2: Restart upon fault
Tens (position): Value of E05, E06, and E07
0: Coast to stop
2: Restart upon fault
Hundreds (position): Value of E08
0: Coast to stop
Thousands (position): Value of E09
0: Coast to stop
2: Restart upon fault
Ten thousands (position): Value of E10
0: Coast to stop
2: Restart upon fault
Description
The fault protection actions are set by the ones, tens, hundreds, thousands, and
ten thousands places of this parameter.
0: Coast to stop
The AC drive coasts to stop.
2: Restart upon fault
The AC drive will restart upon faults.
F9-48
Fault protection action selection 1
Address:
0xF930
Min.:
0
Unit:
‑
Max.: 50555 Data type: UInt16
Default:
0
Change:
At stop
Value Range: