Inovance MD500-PLUS Series - Page 256

Parameter Groups
‑255‑
Ones (position): Value of E11
0: Coast to stop
1: Decelerate to stop
2: Restart upon fault
4: Warning
5: Canceled
Tens (position): Value of E12
0: Coast to stop
1: Decelerate to stop
2: Restart upon fault
4: Warning
5: Canceled
Hundreds (position): Value of E13
0: Coast to stop
1: Decelerate to stop
2: Restart upon fault
4: Warning
5: Canceled
Thousands (position): Value of E14
0: Coast to stop
Ten thousands (position): Value of E15
0: Coast to stop
1: Decelerate to stop
3: Electromagnetic shorting
4: Warning
5: Canceled
Description
The fault protection actions are set by the ones, tens, hundreds, thousands, and
ten thousands places of this parameter.
0: Coast to stop
The AC drive coasts to stop.
1: Decelerate to stop
The AC drive decelerates to stop.
2: Restart upon fault
The AC drive will restart upon faults.
3: Electromagnetic shorting
The AC drive enters the electromagnetic shorting state.
4: Warning
The AC drive continues to run.
5: Disabled
Fault detection is disabled.