Inovance MD500-PLUS Series - Page 682

Function Application
‑681‑
Para.
Function Basic Unit Description
U0‑11
AI3 voltage (V)
0.01 V
‑
U0‑12
Count value
1
This parameter indicates the count value in
the counting function.
U0‑13
Length value
1
This parameter indicates the length in the
fixed‑length function.
U0‑14
Load speed
display
This
parameter
is
determined
by the ones
position of
F7‑12.
This parameter indicates the load speed.
U0‑15
PID reference
1
PID reference value = PID reference
(percentage) x FA‑04 (PID reference feedback
range)
U0‑16
PID feedback
1
PID feedback = PID feedback (percentage) x
FA‑04 (PID reference feedback range)
U0‑17 PLC stage 1
There are a total of 16 stages.
U0‑18
Pulse input
reference (kHz)
0.01 kHz This parameter indicates the high‑speed pulse
sampling frequency of DI5.
U0‑19
Feedback speed
(Hz)
0.01 Hz
When the tens position of F7‑12 (number of
decimal places for load speed display) is set to
1, U0‑19 has one decimal place and the
displayed value range is –500.0 Hz to +500.0
Hz.
When the tens position of F7‑12 is set to 2, U0‑
19 has two decimal places and the displayed
value range is ‑320.00 Hz to +320.00 Hz.
U0‑20
Remaining
running time
0.1 min
This parameter indicates remaining running
time during operation.
U0‑21
AI1 voltage
before
correction
0.001 V
This parameter indicates the actual AI
sampling voltage/current value.
Linear correction is performed to reduce the
deviation between the sampling voltage/
current and the actual voltage/current. For
voltage/current after correction, see U0‑09
and U0‑10.
U0‑22
AI2 voltage (V)/
current (mA)
before
correction
0.001 V/
0.01 mA
U0‑23
AI3 voltage
before
correction
0.001 V
U0‑24
Linear speed 1 m/min
U0‑25 Current power‑
on time
1 min
‑
U0‑26
Current running
time
0.1 min
‑