Parameter List
‑8‑
Parame
ter
Address Name Value Range Default Unit Change
Method
Page
F0‑03 0xF003 Main frequency
source X selection
0: Digital setting (preset
frequency (F0‑08) that can be
changed by pressing UP/
DOWN, non‑retentive upon
power failure)
1: Digital setting (preset
frequency (F0‑08) that can be
changed by pressing UP/
DOWN, retentive at power
failure)
2: AI1
3: AI2
4: AI3
5: Pulse reference (DI5)
6: Multi‑reference
7: Simple PLC
8: PID
9: Communication
10: Reserved
0 ‑ At stop "
F0‑03
"
on
page 94
F0‑04 0xF004 Auxiliary frequency
source Y selection
0: Digital setting (preset
frequency (F0‑08) that can be
changed by pressing UP/
DOWN, non‑retentive upon
power failure)
1: Digital setting (preset
frequency (F0‑08) that can be
changed by pressing UP/
DOWN, retentive at power
failure)
2: AI1
3: AI2
4: AI3
5: Pulse reference (DI5)
6: Multi‑reference
7: Simple PLC
8: PID
9: Communication
10: Reserved
0 ‑ At stop "
F0‑04
"
on
page 95
F0‑05 0xF005 Range selection of
auxiliary frequency
reference Y upon
superposition
0: Relative to the maximum
frequency
1: Relative to the main
frequency X
0 ‑ In real time "
F0‑05
"
on
page 97
F0‑06 0xF006 Range value of
auxiliary frequency
reference Y upon
superposition
0% to 150% 100 % In real time "
F0‑06
"
on
page 98
To Next Page
Loading...
