Intel Stratix 10 Configuration User Guide

6. On the Input Files tab, click Add Bitstream, select the factory and application
image .sof files and click Open.
a. Bitstream_1 is the bitstream for factory image.
b. Bitstream_2 is the bitstream for application image.
7. In the Configuration Device tab, click Add Device, select MT25QU02G flash
memory and click OK. The Programming File Generator tool automatically
populates the flash partitions.
8. Select the FACTORY_IMAGE partition and click Edit.
5. Remote System Upgrade
UG-S10CONFIG | 2018.11.02
Intel Stratix 10 Configuration User Guide
Send Feedback
88

Intel Stratix 10 Specifications

General

Brand	Intel
Model	Stratix 10
Category	Control Unit
Language	English