Invacare Storm 4 - Adjusting the Seat Depth with Replacing the Seat Support Plate

Adjustingthemobilitydevicetotheuser'sseatingposture
5.Repeattheseoperationsontheothersideoftheseat.
6.UndoandremovethetwoAllenscrews(5)includingwashers.
Assembly:
1.PulltheseatsupporttotherequiredlengthsothattheAllen
screws(5)canbeinsertedintheholesinaccordancewiththe
table(seeabove).
2.InserttheAllenscrews(5)includingwashersagainandtighten
them.
3.FitthetwoAllenscrews(8)whicharelocatedattherearofthe
seatsupport,andconnectthemwiththecrossmembers(4).You
mustbeusingotherholeswithinthe3holepairsforthescrews
thanyoudidduringdismantling.
4.Refitallthepartsyouhaveremoved.
6.13.4Adjustingtheseatdepthwithreplacingthe
seatsupportplate
Explodeddrawingofseatsupport
Disassembly:
1.Removethelegrests.
2.Removethearmrests.
3.Removetheseatcushion.
4.Removeanycabletieswhichholdcablesfromtheremoteor
lightingwhichhavebeenfitted.Removethecablesfromany
clipswhichhavebeengluedon.
5.Undothecapnutsontheheadlightholderswithan8mmjaw
spanner.
1529686-P51