iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
115
4.4.4.3 VoIP Attributes - PGM 142
Selecting VoIP Attributes will display the Analog Attributes data input page.
Enter a valid CO range and click [Load] to enter the VoIP Attributes data.
Use the checkmark to indicate which attributes to modify; checked attributes are stored by clicking the [Save]
button.
Enter CO Range: eMG80/100: 1-74 / eMG800: 1-600 / UCP: 1-998
Figure 4.4.4.3-1 VoIP Attributes
The VoIP channels can support iPECS, H.323, or SIP
protocols. This field defines the protocol for the VoIP
channel(s).
COMMON
H323 only
SIP only
RTP-Packet-Relay only
H323 & RTP-Packet-Relay
SIP & RTP-Packet-Relay
To Next Page
Loading...
