iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
236
4.4.6.8 Personal Group Attribute - PGM 261
Selecting Personal Group Attribute will display the Personal Group Attribute entry page. Enter a valid Personal
Group number to enter the group data. Click the [Save] button after changing Value.
Enter Group Number: eMG80/100: 1-70 / eMG800: 1-600 / UCP: 1-1200
Figure 4.4.6.8-1 Personal Group Attributes
Table 4.4.6.8-1 PERSONAL GROUP ATTRIBUTES
If this value is set to Overall, all members wake up, follow by
master wake up.
If this value is set to Individual, individual wake-up is worked by
each station.
If this value is set to Overall, the call forward setting affects Master
and all members.
If this value is set to Individual, individual Call Forward is worked
by each station.
If this value is set to Overall, the DND setting affects Master and
all members. If this value is set to Individual, individual DND is
worked by each station.
If this value is set to ON, Master, and Member Stations are linked,
and only one station can be activated.
OFF (Cover Ring), ON (Cover Ring and State Sync.)
If set to Overall, PAGE and PTT calls are received by the Master
and all members by the Master who belongs to the PAGE zone
and PTT group.
If this is set to Individual, PAGE and PTT calls are received only
by each station that belongs to the PAGE zone and PTT group.
To Next Page
Loading...
