iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
242
4.4.7.5 ICLID Ring Assignment Table - PGM 204
Selecting ICLID Ring Assignment Table will display the ICLID Ring Assignment Table data entry page. The
station number starts 100 for eMG80/100 and 1000 for eMG800/UCP. Click the [Save] button after changing
Value.
Figure 4.4.7.5-1 ICLID Ring Assignment Table
If the Incoming Caller ID matches an entry in the ICLID Route Table, the index from the Table is used to
determine the call routing from the ICLID Ring Assignment Table. Separate ring assignments are made for
Day, Night, and Timed Ring mode for each index, 001 to 250, in this table. When assigned to ring to a VSF
announcement, the call can be automatically dropped after the announcement by entering ‘#’ after the
announcement number.
When CO Lines are programmed to Ring an external AA/VM, VSF, or Feature Server Group as an Automated
Attendant, the Ring signal can be immediate or delayed, allowing other stations/groups to be assigned Ring
and answer prior to signaling the AA. The delay is defined in seconds from 00 to 30.
To Next Page
Loading...
