iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
395
4.5.7 License Install
Various licenses can be installed to expand the capacity of the system and Auto Attendant/Voice Mail services
available in the system, as well as soft clients and feature applications. After obtaining a license, you can find
the status of each license.
Figure 4.5.7-1 License Install
4.5.7.1 License upload
Before License upload, make sure that the date of the system is set correctly. Click the Select files button and
then open the pop-up folder—select a valid license file to upload to the system and click the [Start] button. If
the file which is sent to the system is “System License File,” it will be saved and automatically applied without
restart. The enabled features by uploading the license file can be shown on the “System Overview” page.
Figure 4.5.7.1-1 License Upload
You can check the license upload detailed log by clicking the "Log View" button.
To Next Page
Loading...
