iPECS UCP100 - Attendant Ring Mode - PGM 257

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
208
4.4.5.41 Attendant Ring Mode – PGM 257
Selecting Attendant ring mode will display the Attendant ring mode entry page. Click the [Save] button after
changing Value.
Figure 4.4.5.41-1 Attendant Ring Mode
The administrator assigns the ring mode to 1 Main attendant and 15 ICM Tenancy Group attendants.
Five ring modes are supported as Day, Night, Timed, Auto, On-demand ring mode (eMG80/100: 1~15/
eMG800: 1~32/UCP: 1~100).
The Attendant controls the system Ring mode changing from Auto ring Mode to Day, Night, Timed, or On-
demand ring mode. Based on the ring mode selected in the field of Saved Ring Mode, different ring
assignments, COS (Class of Service), and answering privileges are invoked for the system users.
In case the Main attendant selects the other ring mode of Day ring mode in the field of Saved Ring Mode, the
ICM Tenancy group attendant controls the system ring mode instead of the Main attendant. So Current Ring
Mode and the Saved Ring Mode of ICM Tenancy group attendant may be different.