iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
341
4.4.12.5 T-NET Control Contact -PGM 334
Selecting T-NET Control Contact will display the data entry page. Enter the T-NET range from the T-Net LM
Attributes, then click [Load] to modify the data. Click the [Save] button after changing Value.
Enter T-NET Range: eMG80/100: 1-15 / eMG800: 1-32 / UCP: 1-100
Figure 4.4.12.5-1 T-NET Control Contact
Each LM incorporates relay contacts that can be employed as a Door Lock Release. The contact activates a
third-party Door Lock Release mechanism activated by dialing the Door Unlock code at a local station. In the
case of selecting Alarm, you can choose the desired alarm types for the association.
To Next Page
Loading...
