iPECS UCP100 - System Date & Time

To Next Page

To Previous Page

iPECS eMG80/100& eMG800 & UCP & vUCP

Administration and Programming Manual Issue 2.5

187

4.4.5.26 System Date & Time - PGM 178

Selecting System Date & Time will display the System Date & Time and DST data entry page. Click the

[Save] button after changing Value.

Figure 4.4.5.26-1 System Date & Time

The System Date and Time are established by the [Time & Date] menu. The date and time are employed for

several features and functions, including; LCR, LCD displays, SMDR outputs, Auto Ring mode Selection,

Wake-up Alarm, etc.

If Daylight Savings Time is enabled, the system time will be adjusted one hour forward and back at the DST

start and end times, respectively.

iPECS UCP100 - System Date & Time - PGM 178