iPECS UCP100 - Ipecs System Web Access & Login

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
16
4.2 iPECS system Web Access & Login
Enter the MPB or UCP IP address (default is 10.10.10.2) and TCP port in the browser' ADDRESS' field. Select
GO; the Web server returns iPECS system Web Services Login page, Figure 4.2.1-1. The Web services
include the Admin and Maintenance functions and the Station Program User Portal.
For access to the Admin and Maintenance function, the User ID and Password should be matched with the
assignments in the User Management.
The default Maintenance User ID is ‘admin,’ and the password is ‘1234’. The system will return the Admin &
Maintenance Main page, section 4.3.
To access the Station program, the user must enter their Station number and full Authorization code (station
number and Auth code) in Tables Data – Station Authorization Code (PGM 227). The system will return the
Station Program Main page as shown in section 4.6.
Figure 4.2-1 iPECS eMG80 Home page
Figure 4.2-2 iPECS eMG100Home page