iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
1
1 Appendix A: Program Codes
User and Attendant Program Codes, refer to Table A-1 and A-2, are digit sequences users, and the Attendant
may dial while in the User Program Mode to assign Flex buttons and affect the status of a feature or setting.
For more information on the User Program Mode, refer to the iPECS Features and Operation Manual. Many of
these codes may be assigned to a button of an iPECS IP or LDP Phone by pressing the [PGM] button as the
first entry of a Flexible button assignment. See Flex button Programming in the iPECS Features and
Operation Manual.
Table A-1Station User Program codes
Table A-2 Attendant User Program Codes
To Next Page
Loading...
