iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
24
4.3.2 Using Function Base
Function Base is designed to customize the feature or PGM by configuring the Function base so that
customers can easily use the desired and frequent feature.
There are two buttons: Common Function List and User Function List. The feature or PGM can register up to
20 as a Favorite function.
Common Function List
Generally, the iPECS system supports the basic function list as default. The available function is 5 (DID
Setting Scenario, Network Scenario, SIP Extension Registration, SIP Trunk Configuration, Station Group
Scenario). The 5 functions can’t be deleted or editable.
Figure 4.3.2-1 Common Function List
User Function List
To configure the user function list, click the Maintenance button and then you can see the Function Program in
the left frame and click the sub menu ‘User Function Management’ as the following figure. On this web page,
you can add or delete the function.
Figure 4.3.2-2 User Function Management
To Next Page
Loading...
