iPECS UCP100 - DECT Registration (0#)

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
372
4.4.16.1 DECT Registration (0#)
Selecting DECT Registration returns the DECT Registration input page. Use the checkmark to indicate which
attributes to modify; checked attributes are stored by clicking the [Save] button.
Figure 4.4.16.1-1 DECT Subscription Screen
On this page, the DECT PARK and authorization codes are defined. Several “Options” are available to enable
subscription, unsubscribe a DECT station, enable mobility, etc. A chart is included displaying the registered
and subscribed DECT terminals.
Table 4.4.16.1-1 DECT Registration
ATTRIBUTE
DESCRIPTION
RANGE
DEFAULT
Park Code
The PARK (Portable Access Rights Key) Code is a unique
system Id entered at the DECT handset during the
subscription process.
14 digits
Not
programmed
AC Code
The Authentication Code is entered at a DECT handset to
verify the subscription.
Up to 8
digits
1111
DECT Subscribe
All Data Erase
Password
To erase all data of DECT, enter the password.
Option
DECT Subscribe
Enable
Enables the system to accept subscriptions from a DECT
handset.
Desired Station
It is desired station number for the wireless DECT handset.
Station
Number