iPECS UCP100 - Mobile Extension Table - PGM 236

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
249
4.3.9.12 Mobile Extension Table – PGM 236
A mobile phone can be used in conjunction with an iPECS Phone. The Mobile phone can access system
resources available to the user‘s wired phone and receive a ring for incoming iPECS calls. The user may be
allowed to enable the Mobile extension and define the mobile number. The system can be defined to employ a
specific CO/IP Line Group to place calls to the Mobile phone.
The Mobile Extension Table also defines Notification of new VSF messages. When a new message is
received for a user in the VSF, the system will call the assigned ‘Tel Number,’ notifying the user of the new
message.
PROCEDURE:
MOBILE EXTENSION TABLE
ENTER STA NUMBER
Press the [PGM] button and dial 236, and enter the STA number (Ex.100).
100: MOBIL EXT ATTR
PRESS FLEX KEY (01-14)
Use the dial-pad to enter the desired station number.
Press the Flex button for the desired item; refer to Table 3.3.9.12-1.
Use the dial-pad to enter the required data.
Press the [Save] button to store the data entry.
Table 3.3.9.12-1 MOBILE EXTENSION (PGM 236)
BTN
ATTRIBUTE/DISPLAY
DESCRIPTION
RANGE
DEFAULT
1
100 : PGM AUTHORITY
(1:ON/0:OFF) : OFF
The user may be allowed to activate the
mobile extension feature.
0: OFF
1: ON
OFF
2
100: USAGE
DISABLE (0-2)
Mobile extension feature can be enabled,
and Fail Over to Mobile extension can be
included
0: DISABLE, 1: MOBILE EXT, 2: FAILOVER
Refer to
description
DISABLE
3
100: ACCESS CO GRP
CO GRP: 01
CO group used to call (ring) the mobile
extension.
eMG80/100:1-21, eMG800:1~201
Refer to
description
01
4
100 : TEL NUMBER
………………………..
Telephone number of the Mobile extension.
Not
assigned
5
TABLE 001 CLI
………………………
When the mobile Telephone number and CLI
do not match, the CLI entered here
authorizes incoming calls from the mobile.
Not
assigned
6
100: HUNT CALL ENABLE
(1:ON/0:OFF) : OFF
When the paired station is a hunt group
member (ACD, Circular, or Terminal), group
calls can be sent to the active mobile
extension.
0: OFF
1: ON
OFF
7
100 : VSF NOTIFY
(1:ON/0:OFF) : OFF
Enables outbound notification by the system
when the VSF has unheard messages.
0: OFF
1: ON
OFF