iPECS UCP100 - Page 691

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
250
Table 3.3.9.12-1 MOBILE EXTENSION (PGM 236)
BTN
ATTRIBUTE/DISPLAY
DESCRIPTION
RANGE
DEFAULT
8
100: NOTIFY RETRY CNT
(1~9) : 3
Defines the number of attempts the system
will make to complete a notification when
receiving a busy/no-answer.
1~9
3
9
100 : NOTIFY RETRY INT
(1~3) : 3
Defines the time between notification
attempts. If a notification fails, the system will
retry after the timer expires.
1~3
(Minutes)
3
10
100: NOTIFY BY MY CLI
(1:ON/0:OFF) : OFF
When the system sends CLI to the mobile
extension, the CLI can be either the original
caller’s CLI or the CLI of the station.
0: OFF
1: ON
OFF
11
100 : CALL BACK
(1:ON/0:OFF) : OFF
If it is set to “ON,” an incoming mobile
extension call will be released before it is
answered, and the system places a call to a
mobile extension. After the mobile extension
answers, the dial tone is provided, and the
mobile extension can make an internal or
external call.
0: OFF
1: ON
OFF
12
100 : DELAY TIMER
(000-255) : 000
A mobile extension call will be placed after
the delay time.
000~255
0
13
100 : ANNOUNCE
(00-200) : 00
It can be announced for remote control.
0~200
0
14
100 : SUFFIX DID TBL T
(1:ON/0:OFF) : OFF
It provides flexible DID table index when DID
type 2 is used.
0: OFF
1: ON
OFF