EasyManua.ls Logo

iPECS UCP100 - Page 277

iPECS UCP100
721 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
263
Table 4.4.8.3-1 SIP CO ATTRIBUTES
ATTRIBUTE
DESCRIPTION
RANGE
DEFAULT
Diversion
The Id in the “Diversion” header of SIP messages can be based
on the forwarding station, the Original CLI, a fixed User ID, or
Unused.
Unused: no Diversion header provided.
Extension: the Extension SIP User ID or Extension
Outgoing CLI as assigned for the From ID under ID
Individuality.
Original CLI: the CLI received by the system for the original
incoming call.
Fixed Table: the SIP User ID from the SIP UID. Fixed Table
Index attribute assigned below.
Refer to
description
Unused
Mobile Extension External Call
The below applies to calls routed to a Mobile Extension over a SIP Trunk
From/Contact
ID
The Id in the “From” and “Contact” headers of SIP messages
employ the calling station, the original CLI, or a fixed User ID.
Extension: the Extension SIP User ID or Extension
Outgoing CLI as assigned for the From ID under ID
Individuality.
Original CLI: the CLI received by the system for the original
incoming call or Station number for ICM call.
Fixed Table: the SIP User ID from the SIP UID Fixed Table
Index attribute is assigned below.
Refer to
description
Extension
From Display
The “Display” field of the “From” header can be configured to use
the below:
System Rule:
- a. From ID = Extension, display Contact Display Name
from PGM 126, otherwise display Station Name from PGM
111 or blank.
- b. From ID = Original CLI, display Station Name from
PGM 111 for ICM call or the Name in received by the
system for the original outside call.
- c. From ID = Fixed Table display Contact Display Name
from PGM 126 or blank.
Original CLI: the CLI received by the system for the original
incoming call.
Refer to
description
SYS RULE
P-Asserted-ID
The Id in the “P-Asserted Id” header of SIP messages employs
the calling station, the original CLI, or a fixed User ID.
Extension: the Extension SIP User ID or Extension
Outgoing CLI as assigned for the From ID under ID
Individuality.
Original CLI: the CLI received by the system for the original
incoming call or station number for the ICM call.
Fixed Table: the SIP User ID from the SIP UID Fixed Table
Index attribute is assigned below.
Refer to
description
Extension

Table of Contents

Related product manuals