iPECS UCP100 - Page 282

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
268
Table 4.4.8.3-1 SIP CO ATTRIBUTES
ATTRIBUTE
DESCRIPTION
RANGE
DEFAULT
Local Address
Selection
Users can select Local IP(From, Via, and Contact address) used
for the SIP trunk.
It is applied when PGM210- Multi-home Usage is 2nd IP or EXT
UDP Port+2nd IP.
First: System IP.
Second: PGM210-SIP Multi-home 2nd IP.
First
Second
First
ALTC Usage
Users can set ALTC sequence when IPv6 is used with SIP Trunk.
 OFF: IPV4 or IPV6 only in SDP.
 IPV4: IPV4 and IPV6 in ALTC info
 IPV6: IPV6 and IPV4 in ALTC info.
OFF
IPV4
IPV6
OFF