- Added Short Modem Timer in PGM 182~182, 186
- Added the Alarm mode to send email to the address in PGM 163.
- Added the special character to DB management.
- Added the Ring detection register setting in the Analog parameter.
- Added LCD Dimming for LIP-9000 Series & LDP-9240D in PGM 112.
- ‘Go to assignment’ function added to Personal group overview and can check
the master & member list at a glance.
- Added the Station ICR scenario (1201) to Station Data.
- Change the name from UCS Standard to UCS data.
- Added MOH management in Maintenance.
- Added Keyset admin password to Install Wizard.
S/W version 2.1.x.
- The type of Speed numbering is added more in PGM 100.
- ‘DDNS usage of Firewall’&‘Domain name of Firewall’ is added in PGM 102.
- The LCD LED is changed to the option ‘MWI/Ring’ or ‘Ring.’
- The ACD & CRM function is added for UCS Client: CRM function and ACD
login/out & ACD On/Off duty in PGM 112.
- UCS Dialing Rule Use for Standard UCS in PGM 112.
- UCS Mobile Dial Use (Android) for Standard UCS in PGM 112.
- The description of the CLI Name Display is changed. Refer to PGM 113.
- Display full CLI function is added in PGM 113.
- SMTP Server Address fills out up to 64 characters in PGM 127.
- Proxy Server Address fills out up to 64 characters in PGM 133.
- The range for ICLID Usage is changed to Disable, CLI, Name/CLI in PGM 140.
- Web hacking block is added in PGM 160; Web admin login failure count to block,
Web admin hacking block period, Wed admin hacking Email notification.
- UCS Ring ACK count is added in PGM 160, and UCS Ring ACK timer is added
in PGM 180.
- SLT Line monitor and SLT Line Monitor time are added in PGM 160.
- Dial Back to Caller from Remote VM Access is added in PGM 160.
- The Alarm Display is added in PGM 163.
- The range about Alarm is changed to Off, On, Alarm only, Alarm/Email.
Especially, the default of Maintenance Expire Notify is Email only.
- Message wait (Call back) for LED flash is added in PGM 170.
- Outgoing Call type is added for All calls or Answered calls in PGM 177.
- Call log/Directory Auto Idle Timer is added in PGM 180.
- The range of Hot Desk for eMG and UCP is changed in PGM 250: eMG80 (100),
eMG800 (300), UCP (1200).
- The advice of Charge is added in PGM 133.
- SIP Profile is added in PGM 211.
- Signaling port, TLS Version, First & Second TLS crypto, SRTP usage, First &
Second SRTP crypto are added in PGM 212.
- The Interworking system is added in PGM 322.
- The Name option is deleted in PGM 327.
To Next Page
Loading...
