iPECS UCP100 - Page 543

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
102
Table 3.3.3.2-3 STATION ATTRIBUTES III (PGM 113)
BTN
ATTRIBUTE/DISPLAY
DESCRIPTION
RANGE
DEFAULT
24-16
100–110 PREPAID MONEY
000000
Prepaid Money can be entered.
By Call Metering signal, pre-paidmoney can
be calculated.
000000 -
999999
0
24-17
100 – 110 DEFAULT VM NO
….
Default VM group number is used when
users press the [Msg/Call Back]button, and
there is no message.
24-18
100 – 110 SLT MODE
(0-3) : DEFAULT
SLT configuration mode.SLT gain is changed
cording to this configuration. It is used only in
South Africa.
0: Default
1: Short
2: Long
3: Far
Default
24-19
100 – 110 OFF HOOK RING
(0-3) : REFER TO SYS
Off-hook ring-type could be selected by
station base.
0: BURST, 1: MUTE, 2: SYSTEM,
3:SILENCE
Refer to
description
SYSTEM
24-20
100–110 SIP COLOR RING
…..
The color ring is provided from the assigned
SIP VM (UMS).
SIP extension number that is connected to
SIP VM (UMS) server should be assigned.
24-21
100 – 110 FORCED ACNT
(1:ON/0:OFF) : OFF
User should enter an Account Code prior to
placing an outgoing call when this value has
“ON.”
0: OFF
1: ON
OFF
24-22
100 – 110 FLEX BTN PGM
(1:ON/0:OFF) : ON
A user can program Flex buttons at station.
0: OFF
1: ON
ON
24-23
100 – 110 STNWEB_LEVEL
(1-3) : LEVEL 1
There are 3 access levels that can be
assigned to a station.
The station with level 1 can view/access all
programs on the station web.
The station with level 2/3 follows the Station
Web Authorization menu (System Data ->
Station Web Authorization).
LEVEL 1 ~
LEVEL 3
LEVEL 1
24-24
100 – 110 HEADSET PAGE
(1:S/2:H/3:BOTH): SPKR
Paging is provided on the selected device
while in the headset mode.
1:SPKR, 2:HEADSET, 3:Both
Refer to
description
1: SPKR