iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
- Added “Web Connection” and “Telnet Connection”
- Added MOH (after connection) option at the Group Ring Back Tone” of the
Terminal, ACD, Ring Group Attributes
- Added the “Digit Conversion table index.”
- Enhanced VSF Range (VSF MOH4~30)
S/W version 5.0.x.
- Added “System IPV6 Usage/ Address/ Router/ Net Prefix” at System IP Plan
- Added “IP Address” and “Ipv6 Address” at Board Base Attributes
- Added “ISDN Clock Sync” at ISDN Attributes
- Added System register interval at T-NET CM Attributes
- Added Register guard time at T-NET LM Attributes
- Updated the PGM 160&161 for some missed Feature Descriptions.
- Added All Clear the ACR at Station Voice Mail Attributes
- Added Register guard time at T-NET LM Attributes
- Updated the PGM 160&161 for some missed Feature Descriptions.
S/W version 6.0.x.
- Refer to the “What’s New” for more detailed information
- Moved the Section 3. “Station Admin Programming for eMG” to the Appendix D
Copyright© 2013 Ericsson-LG Enterprise Co., Ltd. All Rights Reserved
This material is copyrighted by Ericsson-LG Enterprise Co. Ltd. Any unauthorized reproductions, use, or
disclosure of this material, or any part thereof, is strictly prohibited and is a violation of Copyright Laws.
Ericsson-LG Enterprise reserves the right to make changes in specifications at any time without notice.
The information furnished by Ericsson-LG Enterprise in this material is believed to be accurate and reliable but
is not warranted to be true in all cases.
Ericsson-LG Enterprise and iPECS are trademarks of Ericsson-LG Enterprise Co., Ltd.
To Next Page
Loading...
