CHAPTER 15
Maintaining Components
•
Maintaining the SRX100 Services Gateway Hardware Components on page 93
Maintaining the SRX100 Services Gateway Hardware Components
Table 32 on page 93 describes the common tasks for maintaining the hardware
components of the services gateway.
Table 32: Maintenance Procedures for the SRX100 Services Gateway
Hardware Components
Description
Maintenance
Procedures
For optimum performance of the services gateway, you should regularly
perform the following preventive maintenance procedures :
•
Inspect the installation site for moisture, loose wires or cables, and
excessive dust.
•
Make sure that airflow is unobstructed around the device and into the
air intake vents.
Routine maintenance
To maintain the power supply on the services gateway:
•
Make sure that the power and grounding cables are arranged so that
they do not obstruct access to other device components.
•
Periodically inspect the site to ensure that the grounding and power
cables connected to the device are securely in place and that there is
no moisture accumulating near the device.
CAUTION: We recommend using a surge protector for the power
connection.
Maintaining the
power supply
Related
Documentation
• Monitoring the SRX100 Services Gateway Chassis Using the CLI on page 95
• Monitoring the SRX100 Services Gateway Components Using LEDs on page 97
• Monitoring the SRX100 Services Gateway Using Chassis Alarm Conditions on page 99
• Monitoring the SRX100 Services Gateway Power System on page 101
93Copyright © 2015, Juniper Networks, Inc.
To Next Page
Loading...
