Juniper SRX100B - Connector Pinouts for the SRX100 Services Gateway Console Port; Figure 7: Console Cable Connector; Table 18: RJ-45 Connector Pinouts for the Services Gateway Ethernet Port; Table 19: RJ-45 Connector Pinouts for the Services Gateway Console Port

Table 18: RJ-45 Connector Pinouts for the Services Gateway Ethernet
Port
SignalPin
TX+1
TX -2
RX+3
Termination network4
Termination network5
RX-6
Termination network7
Termination network8
Related
Documentation
Interface Cable and Wire Specifications for the SRX100 Services Gateway on page 33•
• RJ-45 Connector Pinouts for the SRX100 Services Gateway Console Port on page 34
RJ-45 Connector Pinouts for the SRX100 Services Gateway Console Port
Figure 7 on page 34 shows the RJ-45 connector pinouts for the console port.
Figure 7: Console Cable Connector
Table 19 on page 34 describes the RJ-45 connector pinouts for the console port.
Table 19: RJ-45 Connector Pinouts for the Services Gateway Console
Port
DescriptionSignalPin
Request to SendRTS1
Data Terminal ReadyDTR2
Transmit DataTXD3
Signal GroundGround4
Copyright © 2015, Juniper Networks, Inc.34
SRX100 Services Gateway Hardware Guide for B and H Model Numbers