Juniper SRX100B - Verifying Parts Received with the SRX100 Services Gateway; Table 22: Parts List for a Fully Configured SRX100 Services Gateway; Table 23: Accessory Parts List for the SRX100 Services Gateway

Verifying Parts Received with the SRX100 Services Gateway
The SRX100 Services Gateway shipment package contains a packing list. Check the parts
in the shipment against the items on the packing list. The packing list specifies the part
numbers and descriptions of each part in your order.
If any part is missing, contact your Juniper Networks customer service representative.
A fully configured SRX100 Services Gateway contains the chassis with installed
components, listed in Table 22 on page 44, and an accessory box, which contains the
parts listed in Table 23 on page 44.
NOTE: The parts shipped with your device can vary depending on the
configuration you ordered.
Table 22: Parts List for a Fully Configured SRX100 Services Gateway
QuantityComponent
1Chassis, with 8xFE ports
1Power supply adapter (30 W)
12-prong power cord
1DB-9 to RJ-45 adapter, straight through, 7 ft
Table 23: Accessory Parts List for the SRX100 Services Gateway
QuantityPart
1Juniper Networks Product Warranty
1End User License Agreement
1Quick Start
1Security Products Safety Guide
1Juniper Compliance Form Letter
1Product Registration
NOTE: The mounting kits available for rack, desk, and wall installation of the
SRX100 Services Gateway must be ordered separately. Contact your Juniper
Networks customer service representative for more information.
Copyright © 2015, Juniper Networks, Inc.44
SRX100 Services Gateway Hardware Guide for B and H Model Numbers