Installation Overview for the SRX100 Services Gateway
After you have prepared your installation site, you are ready to unpack and install the
services gateway. It is important to proceed through the installation process in the order
shown in Table 20 on page 40.
Table 20: Installation Process Order for the SRX100 Services Gateway
For More Information, SeeProcessSteps
“SRX100 Services Gateway Safety
Requirements, Warnings, and
Guidelines” on page 121
Review the safety guidelines.1
“Site Preparation Checklist for the
SRX100 Services Gateway” on
page 21
Verify that you have prepared your
site for the installation of the services
gateway using the checklist.
2
“Unpacking the SRX100 Services
Gateway” on page 43
Follow the instructions for unpacking
the services gateway and verify that
the parts are received.
3
“Preparing the SRX100 Services
Gateway for Rack-Mount Installation”
on page 47
“Preparing the SRX100 Services
Gateway for Desk-Mount Installation”
on page 48
“Preparing the SRX100 Services
Gateway for Wall-Mount Installation”
on page 48
Prepare the services gateway for
installation.
4
“Installing the SRX100 Services
Gateway in a Rack” on page 51
“Installing the SRX100 Services
Gateway on a Desk” on page 52
“Installing the SRX100 Services
Gateway on a Wall” on page 54
Install the services gateway.5
“Connecting and Organizing Interface
Cables to the SRX100 Services
Gateway” on page 61
Connect cables to external devices.6
“Grounding the SRX100 Services
Gateway” on page 57
Connect the grounding cable.7
“Powering On and Powering Off the
SRX100 Services Gateway” on
page 66
Power on the services gateway.8
Related • Unpacking the SRX100 Services Gateway on page 43
Copyright © 2015, Juniper Networks, Inc.40
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
To Next Page
Loading...
