Juniper SRX100B - Gateway; SRX100 Services Gateway Power Specifications and Requirements; Table 16: Power System Electrical Specifications for the SRX100 Services

Related
Documentation
SRX100 Services Gateway Site Electrical Wiring Guidelines on page 29•
• Clearance Requirements for Airflow and Hardware Maintenance of the SRX100 Services
Gateway on page 27
• Installation Overview for the SRX100 Services Gateway on page 40
• Interface Cable and Wire Specifications for the SRX100 Services Gateway on page 33
SRX100 Services Gateway Power Specifications and Requirements
The AC power system electrical specifications for the SRX100 Services Gateway are
listed in Table 16 on page 31.
Table 16: Power System Electrical Specifications for the SRX100 Services
Gateway
SpecificationPower Requirement
100 to 240 VACAC input voltage
50 to 60 HzAC input line frequency
1 A maximumAC system current rating
WARNING: The AC power cord for the services gateway is intended for use
with the device only and not for any other use.
Related
Documentation
• Clearance Requirements for Airflow and Hardware Maintenance of the SRX100 Services
Gateway on page 27
• SRX100 Services Gateway Site Electrical Wiring Guidelines on page 29
• Monitoring the SRX100 Services Gateway Power System on page 101
• Maintaining the SRX100 Services Gateway Hardware Components on page 93
31Copyright © 2015, Juniper Networks, Inc.
Chapter 5: Power Requirements and Specifications