Juniper SRX100B - Gateway

Documentation General Site Guidelines for Installing the SRX100 Services Gateway on page 24
•
• Preparing the SRX100 Services Gateway for Rack-Mount Installation on page 47
• Preparing the SRX100 Services Gateway for Desk-Mount Installation on page 48
• Preparing the SRX100 Services Gateway for Wall-Mount Installation on page 48
• Installing the SRX100 Services Gateway in a Rack on page 51
• Installing the SRX100 Services Gateway on a Desk on page 52
• Installing the SRX100 Services Gateway on a Wall on page 54
• Connecting and Organizing Interface Cables to the SRX100 Services Gateway on
page 61
Required Tools and Parts for Installing and Maintaining the SRX100 Services Gateway
Table 21 on page 41 lists the tools and parts required to install and maintain the SRX100
Services Gateway.
Table 21: Required Tools and Parts for Installing and Maintaining the
SRX100 Services Gateway
Related TopicTools and PartsTask
“Installing the SRX100
Services Gateway in a Rack”
on page 51
“Installing the SRX100
Services Gateway on a Desk”
on page 52
“Installing the SRX100
Services Gateway on a Wall”
on page 54
•
Phillips (+) screwdriver,
numbers 1 and 3
•
Tie wrap
Installing the SRX100 Services
Gateway
“Connecting the SRX100
Services Gateway to the
Power Supply” on page 65
Electrostatic discharge (ESD)
grounding wrist strap
Connecting the SRX100
Services Gateway
“Grounding the SRX100
Services Gateway” on page 57
Phillips (+) screwdriver,
number 1
Grounding the SRX100
Services Gateway
“Packing the SRX100 Services
Gateway and Components for
Shipment” on page 110
•
Electrostatic bag or
antistatic mat, for each
component
•
Electrostatic discharge
(ESD) grounding wrist strap
Packing the SRX100 Services
Gateway
Related
Documentation
Unpacking the SRX100 Services Gateway on page 43•
• Installing the SRX100 Services Gateway in a Rack on page 51
41Copyright © 2015, Juniper Networks, Inc.
Chapter 7: Installation Overview