NOTE: You can upgrade from an SRX100 Services Gateway Low Memory
version to a High Memory version through a license key. You need not order
a separate High Memory device.
NOTE: SRX100H model providesadditional security features such as Unified
Threat Management (UTM), which consists of IPS antispam, antivirus, and
Web filtering.
NOTE: The SRX100 Services Gateway High Memory model ships with a
license key.
All SRX100 Services Gateways run the Junos OS.
Accessing the SRX100 Services Gateway
Two user interfaces are available for monitoring, configuring, troubleshooting, and
managing the SRX100 Services Gateway:
•
J-Web interface: Web-based graphical interface that allows you to operate a services
gateway without commands. The J-Web interface provides access to all Junos OS
functionality and features.
•
Junos OS command-line interface (CLI): Juniper Networks command shell that runs
on top of a UNIX-based operating system kernel. The CLI is a straightforward command
interface. On a single line, you type commands that are executed when you press the
Enter key. The CLI provides command Help and command completion.
Related
Documentation
SRX100 Services Gateway Specifications on page 24•
• SRX100 Services Gateway Features and Functions on page 4
• Upgrading the SRX100 Services Gateway Low Memory Version to a High Memory
Version on page 90
SRX100 Services Gateway Features and Functions
The SRX100 Services Gateway is a security optimized, fixed processing system that
provides the following features for the Low Memory and High Memory models listed in
Table 4 on page 5. For information on the models with 2 GB memory, see SRX100 Services
Gateway Hardware Guide for H2 Model Numbers.
Copyright © 2015, Juniper Networks, Inc.4
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
To Next Page
Loading...
