CHAPTER 8
Unpacking the Services Gateway
•
Unpacking the SRX100 Services Gateway on page 43
•
Verifying Parts Received with the SRX100 Services Gateway on page 44
Unpacking the SRX100 Services Gateway
The SRX100 Services Gateway is shipped in a cardboard carton. The carton also contains
an accessory box and the SRX100 Services Gateway Quick Start.
NOTE: The device is maximally protected inside the shipping carton. Do not
unpack it until you are ready to begin installation.
To unpack the SRX100 Services Gateway:
1. Open the box in which the device is shipped.
2. Verify the parts received against the lists in “Verifying Parts Received with the SRX100
Services Gateway” on page 44.
3. Store the shipping box and packing material in case you need to return or move the
device at a later time.
Related
Documentation
Required Tools and Parts for Installing and Maintaining the SRX100 Services Gateway
on page 41
•
• Verifying Parts Received with the SRX100 Services Gateway on page 44
• Preparing the SRX100 Services Gateway for Rack-Mount Installation on page 47
• Preparing the SRX100 Services Gateway for Desk-Mount Installation on page 48
• Preparing the SRX100 Services Gateway for Wall-Mount Installation on page 48
• Installation Overview for the SRX100 Services Gateway on page 40
43Copyright © 2015, Juniper Networks, Inc.
To Next Page
Loading...
