Juniper SRX100B - Chapter 21 Laser and LED Safety Guidelines and Warnings; SRX100 Services Gateway Laser and LED Safety Guidelines and Warnings; Class 1 Laser Product Warning; General Laser Safety Guidelines

CHAPTER 21
Laser and LED Safety Guidelines and
Warnings
•
SRX100 Services Gateway Laser and LED Safety Guidelines and Warnings on page 131
SRX100 Services Gateway Laser and LED Safety Guidelines and Warnings
Observe the following guidelines and warnings when working around the SRX100 Services
Gateway:
•
Laser and LED Safety Guidelines and Warnings on page 131
Laser and LED Safety Guidelines and Warnings
General Laser Safety Guidelines
When working around devices, observe the following safety guidelines to prevent eye
injury:
•
Do not look into unterminated ports or at fibers that connect to unknown sources.
•
Do not examine unterminated optical ports with optical instruments.
•
Avoid direct exposure to the beam.
WARNING: Unterminated optical connectors can emit invisible laser
radiation. The lens in the human eye focuses all the laser power on the
retina, so focusing the eye directly on a laser source—even a low-power
laser—could permanently damage the eye.
Class 1 Laser Product Warning
WARNING: Class 1 laser product.
Waarschuwing Klasse-1 laser produkt.
Varoitus Luokan 1 lasertuote.
131Copyright © 2015, Juniper Networks, Inc.