Juniper SRX100B - Table 5: SRX100 Services Gateway Front Panel Leds

Table 5: SRX100 Services Gateway Front Panel LEDs
UsageDescriptionComponentNumber
The Alarm LED can be
used to gather
information on major
or minor alarms or to
determine if the
device is functioning
normally.
The Alarm LED has
the following indicator
colors:
•
Solid red indicates
a major alarm.
•
Solid amber
indicates a minor
alarm.
•
Off indicates that
there are currently
no alarms.
Alarm LED1
The Power LED can be
used to determine if
the device is receiving
power.
The Power LED has
the following indicator
colors:
•
Solid green
indicates that the
device is
functioning
normally.
•
Solid amber
indicates that the
power button has
been pressed and
quickly released.
The device is
gracefully shutting
down.
•
Off indicates that
the device is not
receiving power.
Power LED2
Copyright © 2015, Juniper Networks, Inc.8
SRX100 Services Gateway Hardware Guide for B and H Model Numbers