SRX100 Services Gateway Safety Requirements, Warnings, and Guidelines
To avoid harm to yourself or the device as you install and maintain it, follow the guidelines
for working with and near electrical equipment, as well as the safety procedures for
working with devices. For a discussion of how to make the installation site a safe
environment along with a list of safety warnings, see Appendix A, Safety and Regulatory
Compliance Information.
NOTE: Providing an exhaustive set of guidelines for working with electrical
equipment is beyond the scope of this guide.
Related
Documentation
• SRX100 Services Gateway General Safety Guidelines and Warnings on page 117
• SRX100 Services Gateway Electrical Safety Guidelines and Warnings on page 141
• Required Tools and Parts for Installing and Maintaining the SRX100 Services Gateway
on page 41
• Preparing the SRX100 Services Gateway for Rack-Mount Installation on page 47
• Preparing the SRX100 Services Gateway for Desk-Mount Installation on page 48
• Preparing the SRX100 Services Gateway for Wall-Mount Installation on page 48
• General Site Guidelines for Installing the SRX100 Services Gateway on page 24
121Copyright © 2015, Juniper Networks, Inc.
Chapter 18: General Safety Guidelines and Warnings
To Next Page
Loading...
