KEB F6 User Manual

Parameter Descriptions
168
© 2024 KEB America, Inc.
LC24 Speed at Resonance Deceleration
Speed at which the increase or decrease of the resonant proportional gain in LC23 is fully
effective.
Motor Type
Range
Units
Default
Pass
Level
Ind.
PM
Min.
Max.
Imp.
Met.
RW
RW
0
8.1
-
m/s
0.02
Basic
0
1600
ft/min
-
3.937007874
LC25 KP High Speed
Percentage increase or decrease of the proportional gain at high speed after the point of
resonance has been passed. In some cases, it is beneficial to reduce the gain at high
speed to minimize system response to hoist way vibrations or disturbances. When set to
100%, this function is effectively off.
Motor Type
Range
Units
Default
Pass
Level
Ind.
PM
Min.
Max.
Imp.
Met.
RW
RW
0
400
-
%
100
Basic
0
400
%
-
100
Figure 28. LC25 KP high speed

KEB F6 Specifications

General

Category	Inverter
Protection Class	IP20
Communication Interfaces	PROFIBUS, CANopen, RS485
Operating Temperature	-10°C to +50°C
Series	F6
Output Frequency	0 Hz to 600 Hz
Protection Features	Overcurrent, Overvoltage, Undervoltage, Short circuit
Humidity	5% to 95% (non-condensing)
Altitude	Up to 1000 m above sea level
Control Modes	Sensorless vector control
Storage Temperature	-25°C to +70°C