Further agreements or specifications require written confirmation from KEB America, Inc.
Support and Liability
It is not possible to cover every potential application of our device in a single manual. If
you require further information or if problems occur which are not covered in this
document, you can request the necessary information via KEB America, Inc., or the local
KEB Automation KG agency.
The use of our products in the target application is beyond our control and
therefore exclusively the responsibility of the machine manufacturer, system
integrator or customer.
The information contained in this document, as well as any user-specific advice in spoken
or written form or generated through testing, is provided to the best of our knowledge,
and is considered for informational purposes only. KEB America, Inc. bears no
responsibility or liability for the accuracy of the information listed above, nor for any
violation of industrial property rights committed by a third-party in relation to this
information.
Selection of the most suitable product for any given application is the
responsibility of the machine manufacturer, system integrator or customer.
Evaluation of the product can only be performed by the machine manufacturer in
combination with the application. Any tests performed must be repeated every time any
part of the hardware or software is modified, or any time the unit adjustment is changed.
Copyright
The customer may use the information contained within this document for internal
purposes only. Copyright of this document is held by KEB America, Inc. and remains
valid in its entirety.
This KEB product or parts thereof may contain third-party software, including free and/ or
open-source software. If applicable, the license terms of this software are contained in
the instructions for use. The instructions for use are already available to you, can be
downloaded free of charge from the KEB website or can be requested from the
respective KEB contact person.
To Next Page
Loading...
Need help?
General
