KEB F6 - Scoping on Combivis; Figure 39. Combivis: Device Parameters; Figure 40. Combivis: Define Parameters

Combivis
250
© 2024 KEB America, Inc.
7. Select Device Parameters:
Figure 39. Combivis: Device parameters
8. Double-click on the parameter group to open the parameter group.
9. Double-click on the parameter name or number:
Figure 40. Combivis: Define parameters
10. Define the parameter then select OK to save.
9.3.4 Scoping on Combivis
9.3.4.1 Connecting the Cables
For connecting the cables,  refer to Connecting the Cables section, pg. 246.