CE marked frequency inverter and servo drives were developed and
manufactured to comply with the regulations of the Low-Voltage
Directive 2006/95/EC.
The inverter or servo drive must not be started until it is determined that the installation
complies with the Machine Directive (2006/42/EC) as well as the EMC-directive
(2004/108/EC) (note EN 60204). The frequency inverters and servo drives meet the
requirements of the Low-Voltage Directive 2006/95/EC. They are subject to the
harmonized standards of the series EN 61800-5-1.
This is a product of limited availability in accordance with IEC 61800-3. This product may
cause radio interference in residential areas. In this case the operator may need to take
corresponding measures.
UL Marking
This device has been investigated by UL according to United States Standard UL 61800-
5-1, Third Edition (Power Conversion Equipment) and to the Canadian Standard CSA
C22.2 No. 274-17 (Adjustable Speed Drives).
To Next Page
Loading...
