KEB F6 User Manual

Preface
20
© 2024 KEB America, Inc.
Standards for Drive Controllers
Product Standards Applicable to Drive Controller
CSA C22.2
Adjustable Speed Drives (No. 274)
EN 61800-2
Adjustable speed electrical power drive systems - Part 2: General requirements -
Rating specifications for low voltage adjustable frequency a.c. power drive systems
(VDE 0160-102, IEC 61800-2)
EN 61800-3
Speed-adjustable electrical drives. Part 3: EMC requirements and specific test methods
(VDE 0160-103, IEC 61800-3)
EN 61800-5-1
Adjustable speed electrical power drive systems - Part 5-1: Safety requirements -
Electrical, thermal and energy (IEC 61800-5-1); German version EN 61800-5-1
EN 61800-5-2
Adjustable speed electrical power drive systems - Part 5-2: Safety Requirements -
Functional (IEC 22G/264/CD)
EN 81-20
Safety rules for the construction and installation of elevators - Elevators for the
transport of persons and goods - Part 20: Passenger and goods passenger elevators
EN 81-50
Safety rules and examinations and tests - Part 50: Design rules, calculations,
examinations, and tests of lift components
IEC 61508-1
Functional safety of electrical/electronic/programmable electronic safety-related
systems - Part 1: General requirements
UL 61800-5-1
Standard for Adjustable Speed Electrical Power Drive Systems
Basic Standards Referenced by Drive Controller Standards
EN 55011
Industrial, scientific and medical equipment - Radio frequency disturbance
characteristics - Limits and methods of measurement (CISPR 11); German version EN
55011
EN 55021
Interference to mobile radiocommunications in the presence of impulse noise -
Methods of judging degradation and measures to improve performance
(IEC/CISPR/D/230/FDIS); German version prEN 55021
EN 60529
Degrees of protection provided by enclosures (IP Code) (IEC 60529)
EN 60664-1
Insulation coordination for equipment within low-voltage systems Part 1: Principles,
requirements and tests (IEC 60664-1)
EN 60721-3-1
Classification of environmental conditions - Part 3-1: Classification of groups of
environmental parameters and their severities - Section 1: Storage (IEC 60721-3-1);
German version EN 60721-3-1
EN 60721-3-2
Classification of environmental conditions - Part 3: Classification of groups of
environmental parameters and their severities - Section 2: Transportation and handling
(IEC 104/670/CD)

KEB F6 Specifications

General

Category	Inverter
Protection Class	IP20
Communication Interfaces	PROFIBUS, CANopen, RS485
Operating Temperature	-10°C to +50°C
Series	F6
Output Frequency	0 Hz to 600 Hz
Protection Features	Overcurrent, Overvoltage, Undervoltage, Short circuit
Humidity	5% to 95% (non-condensing)
Altitude	Up to 1000 m above sea level
Control Modes	Sensorless vector control
Storage Temperature	-25°C to +70°C