KEB F6 User Manual

Parameter Descriptions
© 2024 KEB America, Inc.
83
8.2 Basic Setup Parameters (US)
Risk of minor or moderate injury!
 Do not change parameters while car is running.
US02 System Units
Motor Type
Setting Options
NUM
Range
Units
Default
Pass
Level
Ind.
PM
Min.
Max.
Imp.
Met.
RW
RW
System Units
-
0
1
-
-
1
Basic
m/sec
0
-
-
-
-
-
-
ft/min
1
US03 Motor Type
Selects the motor type and gearing configuration of the system.
Motor Type
Setting Options
NUM
Range
Units
Default
Pass
Level
Ind.
PM
Min.
Max.
Imp.
Met.
RW
RW
Motor Type
-
0
1
1
Basic
Induction
0
-
-
-
-
-
-
PM synchronous
1
Changing to a new configuration will return the parameter values to default! If a
new configuration is loaded, a user will need to go through all start-up steps
before running the motor.

KEB F6 Specifications

General

Category	Inverter
Protection Class	IP20
Communication Interfaces	PROFIBUS, CANopen, RS485
Operating Temperature	-10°C to +50°C
Series	F6
Output Frequency	0 Hz to 600 Hz
Protection Features	Overcurrent, Overvoltage, Undervoltage, Short circuit
Humidity	5% to 95% (non-condensing)
Altitude	Up to 1000 m above sea level
Control Modes	Sensorless vector control
Storage Temperature	-25°C to +70°C