Risk of serious injury or death! Qualified Personnel only!
All work involving this product, installation, start up as well as
maintenance, may only be performed by qualified electrical technical
personnel. According to this manual, "qualified" means: those who are
able to recognize and acknowledge the possible dangerous conditions
based on their training and experience and those who are familiar with the
relevant standards and installation codes as well as the field of power
transmission.
Risk of property damage, serious injury or death!
Prevent accidental contact!
AC motor controls and servo drives must be protected against physical
damage during transport, installation, and use.
Components or covers must not be bent or deformed as this may
decrease insulation distances inside the unit resulting in an unsafe
condition.
On receipt of the unit, visual damage should be reported immediately to
the supplier.
DO NOT ATTEMPT TO POWER UP A UNIT WITH VISIBLE PHYSICAL
DAMAGE. This unit contains electrostatically sensitive components
which can be destroyed by incorrect handling. For that reason,
disassembly of the unit or contact with the components should be
avoided.
Risk of serious injury or death due to electric shock!
Redundant Safety Mechanisms!
The AC motor control or servo system can be adjusted to self-initiate an
automatic restart in the event of a fault or error condition. The design of
the system must take this into account, such that personnel are safe
guarded against potentially dangerous circumstances.
To Next Page
Loading...
Need help?
General
