KEB F6 - Page 89

Parameter Descriptions
© 2024 KEB America, Inc.
89
Programmable Input
Functions for LI04 - LI11:
Description of Functionality:
NUM
UPS + Reduced torque +
Emergency power speed
Currently not implemented
11
Emergency profile +
Emergency power speed
Currently not implemented
12
UPS + Emergency Profile +
Emergency power speed
Currently not implemented
13
Reduced torque +
Emergency profile +
Emergency power speed
Currently not implemented
14
UPS + Reduced torque +
Emergency profile +
Emergency power speed
Currently not implemented
15
Fault reset
Input to reset drive fault errors
16
External fault

the input may be from the controller, linked from a drive
output, etc.
17
Reserved
Reserved for future use
18
Main contactor check**
Indicates the motor contactor auxiliary has closed/opened.
Qualifies enable. Drive will not output current until this
confirmation has been received; fault if not Motor
Contactor Fault: Release  
Fault: Engage Timeout Premature open will result in
drive disable.
19
Earthquake speed
Earthquake speed selected, LS08. All speeds limited to
150fpm max.
20
Emergency slowdown
(ESD)**
Alternate slowdown selected, according to LS48, 49; (e.g.
quick stop).
21
Reserved
Reserved for future use
22
Reserved
Reserved for future use
23
Reserved
Reserved for future use
24
Up direction
Input assigned as up direction command
25
Down direction
Input assigned as down direction command
26
Speed selection**
Input assigned for speed selection when US04 = binary or
digital speed selection; I1 > I2 ... > I8.
27
ETS
(Emergency terminal
slowdown)**
Emergency terminal slowdown
28
NTS1
(Normal terminal
slowdown)**
Normal terminal slowdown 1
29