Keithley 2002 User Manual

IEEE-488 Conformance Information
E-2
(16)
(17)
(18)
(19)
(20)
(21)
(22)
(23)
Response to *IDN (identification).
Storage area for *PUD and *PUD?
Resource description for *RDT and *RDT?
Effects of *RST, *RCL and *SAV.
*TST information.
Status register structure.
Sequential or overlapped commands.
Operation complete messages.
See paragraph 3.10.4.
Not applicable.
Not applicable.
See paragraphs 3.10.9, 3.10.8, 3.10.10, and Tables 3-4
through 3-16.
See paragraph 3.10.14.
See paragraph 3.7.
All are sequential except :INIT and :INIT:CONT ON, which
are overlapped.
*OPC; see paragraph 3.10.5,
*OPC?; see paragraph 3.10.6,
*WAI; see paragraph 3.10.15.
Table E-1 (cont.)
IEEE-488 documentation requirements
Requirement Description or reference

Keithley 2002 Specifications

General

Resolution	8.5 digits
DC Voltage Accuracy	±0.0006%
Maximum DC Voltage	1000 V
Maximum AC Voltage	750 V
Maximum DC Current	3 A
Maximum AC Current	3 A
Connectivity	GPIB, RS-232
DC Voltage Range	100 mV to 1000 V
AC Voltage Range	100 mV to 750 V
Resistance Range	10 Ω to 1 GΩ
Model	2002
Category	Multimeter
Interface	GPIB, RS-232
AC Current Accuracy	±0.1%
Frequency Range	0.1Hz to 300kHz
Display	VFD
Type	Digital
Power Supply	100-240V AC, 50/60Hz
Current Range (DC)	100 μA to 3 A
Current Accuracy (DC)	±0.01%
Current Range (AC)	100 μA to 3 A
Current Accuracy (AC)	±0.1%
DC Current Range	100 μA to 3 A
AC Current Range	100 μA to 3 A