Name: Keithley 2002
Brand: Keithley
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Front Panel Operation

2-87

4. If you wish to use the current default function for all

channels, select DEFAULT, then press ENTER.

5. If you intend to program a separate function for each

channel, choose CHOOSE-FUNCTIONS, then press

ENTER. The instrument will prompt you for a channel

number, as in the following typical display:

SELECT CHAN=01 (DCV)

6. Use the cursor and range keys to select a channel, then

press ENTER. Select the desired function, then press

ENTER. Repeat the procedure for all channels to be

deﬁned.

7. Press EXIT as necessary to return to normal display.

Step 4: Enable external scanning

1. From normal display, press CONFIG-SCAN. The in-

strument will display the following:

SCAN OPERATION

INTERNAL EXTERNAL RATIO DELTA

2. Select EXTERNAL, then press ENTER.

Step 5: Start scan

Press SCAN for instructions to set up the external scanner,

program the scan count, scan timer, and data storage. Then

press ENTER to start scanning. When the scan has complet-

ed you can recall stored data and/or scan again. Press EXIT

to interrupt data storage and disable scanning.

2.12 Menu

The main menu accesses the various instrument operations

for which there are no dedicated keys, such as setup storage,

IEEE-488 setup, calibration, self-test, and limits. The main

menu structure is summarized in Table 2-41.

The top level of the main menu is displayed by placing the

instrument in the reading display state, and then pressing the

MENU key.

Some general rules to navigate the menu levels are given in

paragraph 2.3.4.

Other manuals for Keithley 2002

Questions and Answers:

Need help?

Do you have a question about the Keithley 2002 and is the answer not in the manual?

General