Keithley 2230G-30-3 - System Subsystem; System:beeper; System:communicate:gpib:rdevice:address

Section
5: SCPI command reference Series 2230G Triple-Channel Power Supplies
User's Manual
5-50 2230G-900-01 Rev. A / June 2018
SYSTem subsystem
This subsystem contains commands that affect the overall operation of the instrument, such as autozero, beeper,
communications, event logs, and time.
SYSTem:BEEPer
This command tests the beeper function of the power supply. If it passes the test, a beep is issued.
Group
System
Syntax
SYSTem:BEEPer
Arguments
None
Default value
Not applicable
Returns
Not applicable
Example
SYST:BEEP
Tests the beeper function of the power supply.
See also
None
SYSTem:COMMunicate:GPIB:RDEVice:ADDRess?
This command reads the GPIB address of the device.
Group
System
Syntax
SYSTem:COMMunicate:GPIB:RDEVice:ADDRess?
Arguments
None
Default value
1