Keithley 2230G-30-3 - [Source:]Output:parallel[:State]; [Source:]Output:protection:clear

Series 2230G
Triple-Channel Power Supplies User's Manual Section 5:
SCPI command reference
2230G-900-01 Rev. A / June 2018 5-31
[SOURce:]OUTPut:PARallel[:STATe]
This command sets the parallel synchronization state of the three channels. The query version of this command
gets the parallel synchronization state of the three channels.
Group
Source
Syntax
[SOURce:]OUTPut:PARallel[:STATe] CH1CH2|CH2CH3|CH1CH2CH3
[SOURce:]OUTPut:PARallel[:STATe]?
Arguments
CH1CH2|CH2CH3|CH1CH2CH3 The channel that the parallel synchronization state is applied to.
Default value
NONE
Returns
CH1CH2|CH2CH3|CH1CH2CH3
Example
OUTP:PAR CH1CH2
Sets CH1 and CH2 to the parallel synchronization state.
See also
None
[SOURce:]OUTPut:PROTection:CLEar
This command clears the protection state of the power supply.
Group
Source
Syntax
[SOURce:]OUTPut:PROTection:CLEar
Arguments
None
Default value
Not applicable
Returns
Not applicable