Keithley 2230G-30-3 - [Source:]Channel:output[:State]; [Source:]Current[:Level]:Down[:Immediate][:Amplitude]

Series 2230G
Triple-Channel Power Supplies User's Manual Section 5:
SCPI command reference
2230G-900-01 Rev. A / June 2018 5-27
[SOURce:]CHANnel:OUTPut[:STATe]
This command sets the output state of the presently selected channel. The query form of this command returns
the output state of the presently selected channel.
Group
Source
Syntax
[SOURce:]CHANnel:OUTPut[:STATe] <BOOL>
[SOURce:]CHANnel:OUTPut[:STATe]?
Arguments
<BOOL> ON|OFF|0|1 The output state.
Default value
OFF
Returns
0|1
Example
CHAN:OUTP ON
Set the output state of the presently selected channel to ON.
See also
None
[SOURce:]CURRent[:LEVel]:DOWN[:IMMediate][:AMPLitude]
This command decreases the current value of the present channel by one step, as specified by the
[SOURce:]CURRent[:LEVel][:IMMediate]:STEP[:INCRement] command.
Group
Source
Syntax
[SOURce:]CURRent[:LEVel]:DOWN[:IMMediate][:AMPLitude]
Arguments
None
Default value
Not applicable
Returns
Not applicable